LED street light honeycomb radiator, current controller installation box, honeycomb radiator is composed of grid hollow radiator, the middle of the honeycomb radiator is fixed with the installation platform, the installation platform closes the bottom of the middle radiator, the installation platform is fixedly connected to the LED chip, and the LED chip covers the lens , the cross section of the radiator is hexagonal, and the inner wall of the radiator is provided with reinforcing ribs. The side walls between the middle radiators of the honeycomb radiator are connected to form a plurality of drainage channels, and both ends of the drainage channels respectively extend to the outside of the installation platform. The lower end of the honeycomb radiator is fixed with a lamp housing. The hollow honeycomb structure can form air convection at the upper and lower ends of the radiator, increasing its strength and heat dissipation area. At the same time, the upper end of the radiator is provided with a drainage channel, which can automatically drain rainwater. Compared with other radiators, the same heat dissipation area consumes less material and has higher strength, and the setting of the drainage line solves the problem of dust accumulation.

The high-power LED works for a long time at a proper temperature, so that the brightness of the LED chip will not decrease due to overheating. High-power LED honeycomb radiator can be used for various LED lighting sources, which can improve the heat dissipation effect by 60%, so as to give full play to the advantages of LED energy saving, low heat, and no pollution, and achieve better economic and social benefits.

Die-Casting man was established in 1996 which is one of the lighting manufacturers with design & development, production & testing. We continue to offer a superior range of production and service including street light, led high bay lamp products. We can offer a full service or simple SKD supply only.

We understand that lighting technology has to be practical, affordable and reliable. So we always design and develop products with our customersˊ needs in mind. We have a team of lighting designers to design, develop and manufacture our own luminaries.

Also we fully understand high quality is another important element for long term business development. We keep it in mind that products need to meet all EU requirements when we start design process. Our products are tested in credible, recognized laboratories and throughoutproduct development process they go through rigorous performance testing too.

We are a company never stand still on products and service.