What is the correct installation process for led high pole lights?

With the improvement of the economic level, people's requirements for road lighting at night also increase. As a large-scale lighting fixture, high-pole lamps are widely used in outdoor lighting projects due to their wide irradiation range and good brightness. Nowadays, high-pole lamps are installed in many areas. However, the actual installation of high-pole lights has caused many people a headache. They often do not know how to install them correctly. Let me introduce the correct installation process of led high-pole lights.
​​
Preparation before installation
​​
1. Pay attention to shockproof during installation and transportation
​​
2. Pay attention to turn off the power before installing the high pole light to avoid electric shock due to improper operation
​​
3. If the wire of the lamp body is found to be damaged, immediately cut off the power and stop using
​​
4. Check whether the voltage marked on the flood light is consistent with the input voltage

Installation Notes
​​
1. Connect the 3-core signal line of the high-pole light to the controller, and connect the 2-core power line to the switching power supply without wrapping the wires with waterproof tape.
​​
2. Calculate how many floodlights each transformer can install according to the power of the transformer and the power of the floodlights
​​
3. The transformer or switching power supply is connected to the 220V main power supply, and the air switch and time switch are used to control the unified power supply, and the main controller plug is inserted into the 220V power supply.
​​
4. Install the controller first for high pole lights, and the signal line of the lamp is connected to the signal of the controller. Each controller can only carry a fixed number of led flood lights.
​​
Installation test: If the LED light source has poor quality products such as false welding and leaking, poor waterproof treatment, etc., return it to the high-pole lamp manufacturer. Since the high-pole lamp is installed in the outdoor environment, it has a great impact on the life of the street lamp, and the product needs to be resistant to high temperature and heatstroke prevention. It is recommended to choose the designated brand for the products in the early stage to save costs for the later maintenance; if the floodlight cannot be normal, try to replace the light source electrical part first, if there is no problem, then replace the controller. If there is any technical problem, communicate with the manufacturer to solve the problem.
share to: