One. Preparation before installation
1. Pay attention to shockproof during installation and transportation
2. Pay attention to turn off the power before installing the high pole light to avoid improper operation.
3. If the lamp body wire is found to be damaged, immediately stop using the power supply and stop using it.
4. Check if the marked voltage on the floodlight is consistent with the input voltage.
Second. Installation Notes
1. Connect the 3-pin signal line of the high pole light to the controller, and connect the 2-core power cord to the switching power supply without wrapping the cable with waterproof tape.
2. Calculate how many projectors can be installed in each transformer according to the power of the transformer and the power of the floodlights.
3. The transformer switch power supply is connected to the 220V main power supply, and the air switch and time switch are used to control the power supply. The main controller plug is plugged into the 220V power supply.
4. The high pole lamp is first installed with the controller, the lamp signal line is connected to the controller signal, and each controller can only have a fixed number of led floodlights.
Installation test: If the LED light source has such defects as weak soldering and poor soldering, the inferior products are returned to the high pole lamp manufacturer. Because the high pole lamp is installed in the outdoor environment, the impact on the life of the street lamp is very great, and the product needs high temperature resistance and heat proof performance. It is recommended to select the brand on the previous product selection, which will save costs for the later maintenance; if the spotlight can not be normal, try to change the light source electrical part first, then change the controller without any problem, encounter technical problems and communicate with the manufacturer to solve the problem.