Media

How to maintain LED street lamp? How to carry out waterproof work?

                       
Update:2021-02-03
Summary:

During the use of the led road, it is not finished afte […]

During the use of the led road, it is not finished after installation and use. Normal maintenance work is required to make the led street light perform the product performance. How to carry out the waterproof work in the maintenance work, the relevant instructions in this regard are organized below.

How to maintain led street lights?
Take solar panels as an example. In normal maintenance, check the azimuth angle of the solar panels, whether there are branches, leaves or other foreign objects directly blocking them. Whether it is in the shadow area of other objects, whether there are cracks, dust, or dirty lights on the surface. Whether the monomer has cracks and whether the connection is smooth are all within the scope of inspection. In the LED street lamp use system, the battery is the biggest difficulty in maintenance, because the service life of the current normal battery is 2 to 3 years. During its life cycle, the charging and discharging of the battery should be checked frequently, and the electrodes or wiring should be observed at any time There is corrosion or poor contact. These are the main maintenance tasks for led.

How to waterproof LED street lamp?
The sealing of the lamp cap must pass the standard. The waterproof treatment of the lamp cap can ensure the service life of the street lamp. Therefore, the selection of the shell of the street lamp is very important. When choosing, we must pay attention to whether the style has waterproof performance. When installing the controller, it is generally placed in the interior of the road, so as to better avoid the wind and sun. It is necessary to have a certain degree of waterproof performance. For the installation of the battery, the battery should be buried under the ground, about 40 cm away, so as to avoid flooding. Finally, the LED lamp cap should be detected to see if the lamp is on normally. If the lamp is on, it can be used normally. If not, it needs to be replaced.

Basically, the above instructions summarize the above instructions about how to maintain and waterproof LED street lamps. If you have any questions, please call us for advice, and we will update the instructions for you.

https://www.diecastingmanlighting.com/

1+