The high pole lamp generally refers to a new type of lighting device composed of a steel cone-shaped pole and a high-power combined lamp structure between 15 meters and 35 meters. It is composed of lamp holder, internal high pole lamp lamp electrical, pole body and basic parts. The application range of high pole lights is very wide, such as city squares, stations, docks, freight yards, highways, stadiums, and overpasses. The high pole lamp has a wide range of lighting and high brightness, and has become an indispensable part of urban outdoor lighting, and is deeply favored by people. However, when manufacturers produce high pole lights, the following production standards must be met.

1. Material standard
In view of the open-air working environment of high-pole lights, all parts made of steel such as light poles are immersed in zinc to ensure corrosion resistance for 30 years. The steel adopts plug-in type or inner flange type, and the installation site is welded step by step to eliminate hidden dangers. The aluminum profile is oxidized. Parts made of stainless steel and aluminum, and standard parts exposed to the open air are all made of stainless steel. The electrical contact parts are brass or silver-plated electrolytic copper, and the suspension steel cable is stainless steel, and conforms to the current national installation standards. Hot-dip galvanizing is not less than 80um and passivation treatment is carried out.
2. Standards for high-pole lamps
Using aluminum die-casting shell, easy to dissipate heat, can effectively control the temperature and prolong the life. The toughened glass is thermally stable and withstands sudden changes. The inside is smoldering and high-temperature-resistant wiring. The wire inlet has a sealing device to effectively prevent water vapor from entering. The protection level of the lamp is above IP65, and the lamp holder can withstand wind speeds of 30m/s.
3.light source standards
The service life should reach 50000H, high-efficiency high-pressure sodium lamp or high-light LED light source, with instantaneous re-trigger function, usually 200W-1000W, etc. The power supply voltage is 220v.
4.the power factor standard
It must be equipped with a power factor adjustment capacitor of sufficient capacity to make the line power factor between 0.85-0.95 (special order required).
For the above four standards, manufacturers of high pole lights must pay special attention to them during production. The high pole lamp is a large-scale lighting appliance. If it fails to meet the requirements of the production standard, it may affect people's safety after installation. Finally, if the light source standard is not up to the standard, the light source will be easily damaged and not bright, so that it will be more troublesome to maintain in the future.

led high mast lamp