Many people know that when traditional street lights are covering rural areas, it becomes extremely difficult to achieve "village electricity" through large-scale construction of power grid lines. Difficulties such as long power supply lines, large power supply radius, and low power supply voltage make it almost difficult to advance the power supply project. The solar street lights do not need to generate electricity. Therefore, rural solar street lights have become necessary lighting in these rural areas.
In our lives, the types of street lamps seen in different regions are also different. For the high pole lamp, its shape is more atmospheric, the illumination range is wider, and the omnidirectional illumination. The courtyard lamp is at night, It can bring more light to pedestrians, so for the installation of high pole lights, what work needs to be accurate before? The editor summarizes some work processes before and after the installation of high pole lights. For the high pole lamp, its height has a range, ranging from 15 meters to 30 meters. The pole will be polygonal, generally there will be 8 sides, 12 sides, 16 sides, and plug-in type. The structure, there are common products of 20 meters, 25 meters, and 30 meters. The upper caliber, lower caliber, pole section, wall thickness of the upper section and the wall thickness of the lower section are different. Generally, it will be based on the actual It is required to design. For the poles of high pole lights, hot-dip galvanizing and plastic spraying are used, which is suitable for city squares, stations, ports, parking lots, stadiums and other places.
As we all know, LED street lights are mainly composed of two parts: street light poles and LED lamps. The poles of traditional LED street lights are made of high-quality plates. After the whole hot-dip galvanizing, it is treated by electrostatic spraying. The service life of the street light pole is more than 15 years. In order to ensure such a long service life, the courtyard lamp must ensure that the lamp post has good corrosion resistance, and the thickness of the zinc layer is guaranteed to be 65-90 microns, so that the zinc layer and the steel rod are firmly combined Together.